We supply a full range of Domestic Oil Tanks and associated services. We have a dedicated team of OFTEC registered specialists ready to provide you with the expertise to help you choose the right Domestic Oil Tank Wantage for your home. Our services include:
Oil Tank Replacement
The Domestic Oil Tank Wantage we provide will be made to the highest safety standards, and will not need external painting. This keeps the cost of installation and ownership low without compromising the protection of your property. The size of tank you will need should be relative to the size of your property and your heating requirements. Ease of access to the tank, as well as current building regulations, also need to be taken into account, especially when deciding where to locate the tank.
With our expertise we can help you find the best tank to fit both your needs and your means. Every Domestic Oil Tank Wantage:
- Is Guaranteed for 10 years
- Can stand on any flat surface at ground level
- Is easy to install – much lighter than a steel tank
- Is maintenance free – no painting required
- Comes in a choice of sizes to suit your requirements
- Is crack resistant and stress free
We supply a wide range of tanks in all shapes and sizes:
More details can be found on our Tank Replacement page
Oil Tank Relocation
If you have just moved into a house and found that the oil tank is in an inconvenient position, or you are planning an extension and will need the oil tank moved to accommodate it, then Sweetfuels can help. As part of our free Domestic Oil Tank Wantage relocation quotation, our OFTEC registered technician will carry out an assessment to identify any environmental or fire risks associated with the repositioning. More details can be found on our Tank Relocation page
What Size of Tank will I need?
The size of tank you need to install will be relative to the size of your property and your heating requirements.
Must all new Domestic Oil tanks be Bunded?
No, but there are environmental regulations that dictate whether you need to fit a bunded tank on your property, more details of which can be found on our Domestic Regulations page. If you decide to use Sweet Fuels for replacing/installing your tank we conduct a free site survey during which we will determine if you are legally required to have a bunded tank fitted.
Where should I Locate my Tank?
Building regulations must be taken into account, especially when deciding where to locate the tank, as well as access to the tank for filling purposes. With our expertise we can help you decide the best installation to fit your needs.
Is a Concrete Base essential?
No, but a correctly designed concrete base will generally last the life of the tank and ensure that the tank installation remains rigid and does not become susceptible to movement that could cause fractures in associated pipework or the tank structure itself. Such damage caused to tank installations on other types of surface may also invalidate the tank’s warranty.
If I build my own Base will you still Install the Tank for me?
Yes, provided that you can show us the installation details and confirm that all of the work has been carried out in line with the correct and current regulations and standards.
Should I use all the Oil in my existing Tank before it is Changed?
No, in fact if you run the tank right down, sludge can be drawn into the pipework stalling the boiler pump, and potentially causing additional repair bills. We recommend you maintain an oil level in your old tank above 500 litres to allow us to check connections and bleed the system.
Will I still have Heating and Hot Water while my Tank is being Replaced?
Yes, we install temporary tankage while your new installation is in progress.
How will I Dispose of my old Tank?
We will remove your old tank directly to a waste disposal site licensed for this purpose, and provide you with all of the correct paperwork to ensure compliance under current regulations.
What is OFTEC Registration?
The Oil Firing Technical Association (OFTEC) is the trade body that ensures that all oil fuel heating installation work is carried out to the relevant standards, and that members are kept up to date with any changes in legislation. By demonstrating our continued commitment to maintaining those standards, OFTEC issue us and our technicians with valid certification providing you with full assurance that your project will be completed to the highest competency.
What if my old Tank starts to Leak?
Call us immediately on 01367 718333 and we will arrange an emergency call-out to address the problem. This may involve pumping-out the tank or arranging temporary storage capacity for you. We will also provide advice on how to minimise pollution, and on any clean-up processes you will need to put in hand.
Do you just Install New Oil Tanks?
No, we can provide a full range of Domestic Oil Tank services, including regular inspections and maintenance, replacement of pipework, filters, pressure testing of fuel lines, transferring fuel oil, plus bleeding and restarting systems.
My Question is not Listed Here
Please contact us or use the enquiry form on this page and we will do our very best to answer your query as quickly as possible.
Do you need to move heating oil from one tank to another on your premises, or transfer it from your old property to a new one? Then Sweetfuels can provide the right service and equipment to accomplish this as swiftly and efficiently as possible. More details can be found on our Fuel Transfers page
Disposal of Water from inside Tanks
Water can build-up inside an oil tank due to a number of factors such as condensation (in the case of a steel tank), broken tank vents or loose connections on the top surface of the tank. Regular tank checks by one of our OFTEC registered tank technicians should normally prevent this from happening, more information on which can be found on our Water Removal page
Maintenance of Tanks, Pipework, Gauges and Filters
Regular inspection and maintenance of the tank installation will greatly decrease the possibility of any system failures. In addition to providing one-off repair visits on a call-out basis, Sweetfuels provides flexible maintenance contracts that are tailored to fit your specific Domestic Oil Tank Wantage installation. More information can be found on our Tank Maintenance page
All work is carried out by our own OFTEC registered tank technicians. This way we can ensure that the work is carried-out to the highest standards and within the required timescales.
For any of these services, please contact us or use the enquiry form on this page and we will do our very best to answer your query as quickly as possible. We are also happy to arrange a site visit by one of our OFTEC registered technicians to provide you with a free quotation for the work you require.
For your new Domestic Oil Tank Wantage – Think Sweetfuels!